Get a quote

UPB-M2 series

Tension sensor

The UPB series bearing pedestal tension sensor adopts advanced sensor technology and an overall sealed anti-corrosion design, which makes the sensor output linear response speed good, corrosion-resistant, dustproof, highly stable and durable.
Current location: Home · Products · Web Tension system · Tension sensor ·

Product Overview

Product Overview

The UPB series bearing-mounted tension sensors utilize advanced sensor technology and a fully sealed, corrosion-resistant design, resulting in excellent linear response, corrosion resistance, dustproofing, high stability, and durability. The foil strain gauges provide high sensitivity under low tension. They are widely used in printing, laminating, die-cutting, papermaking, rubber, textile, steel strip, wire and cable, and film winding control equipment and production lines.

Product Features

Product Features

The output signal has a high response frequency and good linearity.

Built-in temperature compensation network minimizes temperature drift.

It has the same high sensitivity to both high and low tension.

The effective tension detection range is wide, up to 45:1.

Maximum overload capacity up to 1000%

Installed under the bearing housing, with no moving parts.


*Note: When installing the transition plate and bearing housing, the tightening torque of the fastening bolts should not be too high to avoid affecting the sensor accuracy or even damaging the sensor. Adhesive can be applied to the fastening bolts to prevent loosening.

The UPB series sensors use a split-shaft mounting system. The tension roller is mounted on the bearing housing, and the bearing housing and sensor are connected by a transition plate.


Product selection Table

Product selection Table

MODEL RATED LOAD (N) EXTERNAL DIMENSIONS
L B H D E F L2 L3 N O U L4 W
UPB-M2 10000N 343 114 110 105 144 25 311 280 M16 13 50 150 70
12500N
25000N
30000N
40000N
50000N

Technical Specifications

Technical Specifications

Operating Power Supply 5-15Vdc
Tension Signal Output 0-20mV
Operating Temperature - 38°C ~+ 75°C(Optional: -38°C to +150°C)
Operating Humidity <90%R.H.
Sensor Type Resistance Strain Gauge
Linearity Error <土0.1%
Repeatability Error <+0.1 %
Overall Error <土0.2%
Temperature Drift <土0.02%/°C
Overload Factor 300%
Sensor Housing Material Alloy Steel / Stainless Steel
Protection Rating IP65/IP68
Customization Scope Dimensions, Measurement Range, Material Explosion-proof, High-temperature, Waterproof & Corrosion-resistant

Order Code

Order Code

Download Materials

Download Materials

Application site

Application site



Copyright © Shanghai Yuze Electromechanical Equipment Co., Ltd. All Rights Reserved.

Resource Download

Resource Download

Contact*

Phone*

Email*

Verification code*

Requirements Notes

Download now