2023.05.15
Release time：2022-08-24
Share：
The web guiding controller system is used to control the horizontal position deviation of thin and flexible materials during the conveying process. It features automatic detection, automatic tracking, and automatic adjustment functions. Web guiding controllers are widely used in the lateral adjustment of strip materials in flexible packaging production lines, and are characterized by high reliability, strong anti-interference ability, and excellent cost-effectiveness.
I. Types can be divided into:
(1) Edge Position Control (E.P.C)
(2) Line Position Control (L.P.C)
(3) Centerline Position Control (C.P.C)
II. System Composition
Correction System Composition
The material belt position is detected by a photoelectric sensor and processed by a microcontroller. The amount and direction of material belt movement are determined based on relevant keyboard settings. Motor forward and reverse rotation is achieved through a drive circuit, achieving the desired correction effect. This is an edge position control type EPC automatic correction controller. The drive unit of the EPC device is a "stepper motor ball screw"; the drive unit of the EPC device is a "low-speed synchronous motor ball screw" or a "hydraulic station hydraulic cylinder".
EPC Equipment
The control unit of the line position control type LPC device is composed of a microcontroller. Users can freely adjust the stepper motor speed according to the material's running speed, thus obtaining good control accuracy; the stepper motor rotation direction changes instantaneously, and the operation is smooth without vibration.
LPC Equipment
The control unit of the centerline position control type CPC device is composed of a microcontroller. Its basic functions are the same as the EPC type photoelectric controller, but it has a slight abrupt change and the control speed is slower than the EPC type. The CPC photoelectric controller can replace the drive unit, combined with a solenoid valve driver to drive the hydraulic cylinder, forming a hydraulic correction system.
Cost per click for the equipment
The web guiding controller system can track and correct markings or edges on materials such as paper, film, self-adhesive labels, and aluminum foil to ensure neat winding and slitting. This system can be used in light industry, textiles, dyeing, printing, and other industries.
I. Types can be divided into:
(1) Edge Position Control (E.P.C)
(2) Line Position Control (L.P.C)
(3) Centerline Position Control (C.P.C)
II. System Composition
Correction System Composition
The material belt position is detected by a photoelectric sensor and processed by a microcontroller. The amount and direction of material belt movement are determined based on relevant keyboard settings. Motor forward and reverse rotation is achieved through a drive circuit, achieving the desired correction effect. This is an edge position control type EPC automatic correction controller. The drive unit of the EPC device is a "stepper motor ball screw"; the drive unit of the EPC device is a "low-speed synchronous motor ball screw" or a "hydraulic station hydraulic cylinder".
EPC Equipment
The control unit of the line position control type LPC device is composed of a microcontroller. Users can freely adjust the stepper motor speed according to the material's running speed, thus obtaining good control accuracy; the stepper motor rotation direction changes instantaneously, and the operation is smooth without vibration.
LPC Equipment
The control unit of the centerline position control type CPC device is composed of a microcontroller. Its basic functions are the same as the EPC type photoelectric controller, but it has a slight abrupt change and the control speed is slower than the EPC type. The CPC photoelectric controller can replace the drive unit, combined with a solenoid valve driver to drive the hydraulic cylinder, forming a hydraulic correction system.
Cost per click for the equipment
The web guiding controller system can track and correct markings or edges on materials such as paper, film, self-adhesive labels, and aluminum foil to ensure neat winding and slitting. This system can be used in light industry, textiles, dyeing, printing, and other industries.
